top of page
6 LED Hexagon Chaser Strobe Lights Electronic Kit

6 LED Hexagon Chaser Strobe Lights Electronic Kit

SKU: CK06HEX

Build you own Real Microprocessor Controlled LED Chaser Hexagon Kit.

 

This great kit comes with all components, complete with PCB (Printed Circuit Board), and preprogrammed microcontroller containing the LED chaser software.

  • Product Info

    Ideal for learning about electronics, with a useful and fun end product you can be proud to show as something you built.

     

    There are 6 LEDs which show patterns and chase around the 36mm hexagon. When ordering, you can the choose the colours of LEDs. You could have all the same colour, or you can have a mix of colours.  If you don't see the colour mix that you would like, just send a message and we'll make it for you.

     

    The pattern mode button and speed control can be fitted on the front or the back of the PCB. Similarly, the LEDs can be fitted on the front or the back of the PCB, or you can fit them at an angle to face sideways - whatever is best for your project.

     

    You can select to show any of the preprogrammed patterns by simply pressing the button, or you can have all patterns cycled through in sequence as shown in the video, to give an amazing display. Use several of these hexagon kits together to create a really fabulous display.

     

    The microcontroller remembers your previous pattern selection, so it is restored automatically when you next switch on.

     

    All patterns are animated - the LEDs appear to move and chase each other. The speed of the pattern animations can be set with the adjustment knob.

     

    Available with two different types of LEDs that you can choose from when ordering:

    • Clear: these LEDs are super bright when viewed from the front, but are a little dimmer when viewed from the side.
    • Diffused: these LEDs are not quite as bright as the Clear, but they do give a better all-around viewing.

     

    Complete with detailed assembly instructions to help you to assemble, and a description of what each component does that you can learn from.

     

    Uses a 6V to 12V power source such as a 9V battery. Comes complete with power connecting wires and a PP3 9V battery connector.

     

    Prepared for dispatch in an antistatic environment, packaged in an ESD protective bag.

     

    Please note that the kit:
     - requires good soldering skills.
     - contains flashing lights.
     - is not suitable for small children due to small parts.
     - must be used only for the purposes of fun and amusement.
     - is for occasional indoor domestic UK home use.
     - must not be used near sensitive electronic or medical equipment.
     - is for hobbyist construction and enjoyment.
     - must not be exported outside of the UK.
     - is not for resale in unassembled or any assembled form.
     

    Comes with full technical support.

£8.95Price
bottom of page